1st: I have installed the TMC 2208 drivers (5 drivers)
2nd: I double checked the jumpers (no jumpers plugged in the steppers driver location AND 1 jumper on each UART postion placed)!
3rd: Drviers are plugged in in the correct way
##------------------
Set up in Adourino:
TMC 2208Stepper Driver installed (Version 2.5.1)
Drivers are setp up in configuration.h file in Line 680+:
#define X_DRIVER_TYPE TMC2208
#define Y_DRIVER_TYPE TMC2208
#define Z_DRIVER_TYPE TMC2208
//#define X2_DRIVER_TYPE A4988
//#define Y2_DRIVER_TYPE A4988
//#define Z2_DRIVER_TYPE A4988
//#define Z3_DRIVER_TYPE A4988
//#define Z4_DRIVER_TYPE A4988
#define E0_DRIVER_TYPE TMC2208
#define E1_DRIVER_TYPE TMC2208
//#define E2_DRIVER_TYPE A4988
//#define E3_DRIVER_TYPE A4988
//#define E4_DRIVER_TYPE A4988
//#define E5_DRIVER_TYPE A4988
//#define E6_DRIVER_TYPE A4988
//#define E7_DRIVER_TYPE A4988
AND
// Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way.
#define INVERT_X_DIR true
#define INVERT_Y_DIR true
#define INVERT_Z_DIR false
// @section extruder
// For direct drive extruder v9 set to true, for geared extruder set to false.
#define INVERT_E0_DIR true
#define INVERT_E1_DIR true
#define INVERT_E2_DIR false
#define INVERT_E3_DIR false
#define INVERT_E4_DIR false
#define INVERT_E5_DIR false
#define INVERT_E6_DIR false
#define INVERT_E7_DIR false
##------------------
Connected via USB and then
Display on Printer:
"TMC Connection Error"
##--------------------
Ponterface info:
Printer is now online.
echo:Marlin 2.0.5.3
echo: Last Updated: 2020-03-31 | Author: (none, default config)
echo:Compiled: May 19 2021
echo: Free Memory: 3141 PlannerBufferBytes: 1232
echo:V76 stored settings retrieved (704 bytes; crc 61846)
Testing X connection... Error: All LOW
Testing Y connection... Error: All LOW
Testing Z connection... Error: All LOW
Testing E connection... Error: All LOW
Testing E1 connection... Error: All LOW
I have no clue how to solve the problem
=> WHAT TO DO? Anybody can help me?
@Makerspace please react at least to this post AND react to my mail i sent you!
Thanks for your help!
Please contact info@makertech3d.com for a replacement board.