Miracle Max
Apr 21, 2019
Edited: Apr 21, 2019

Stage 2, Step 3: I can't find Precision Shim for the Roller Wheels

I went through all the bags with no luck, Is it possible these are missing or wrongly tagged on the bags?

2 comments0 replies
Chris D
Apr 22, 2019

it's not tagged in any bag. it's in a bag with out any label on it. they look like loose washers. they are about the size of the M3 or M4 washers. once installed between the bearings you might need to center them with a toothpick, pen or something. as they move off center easily. if i remember correctly they were in the bag with the eccentric nuts for the tool carriage

0
Miracle Max
Apr 23, 2019

Thanks a lot Chris! You are right!

0
New Posts
  • manormews1
    20 hours ago

    Hothead #1 heats up as soon as power on.

    Question 
    Hi, Hothead #1 heats up as soon as power on, raises to 270C won’t tuen off and can’t control via touch screen. Hothead #2 working fine as is bed. Any pointers. James
  • itsmejun
    5 days ago

    TMC2100 and A4988 stepper driver

    Discussion 
    Is anyone upgrade TMC2100 to TMC2130 or TMC2208. Please advice me adjusting a trimpot from TMC2100 to TMC2130 or TMC2208. And it is ok to upgrade?
  • itsmejun
    Jan 15

    Servo direction

    Discussion 
    When I first installed the arm, everything worked for maybe about 30 minutes. Now, when I power it up, the arm doesn't move at all on power up. If I choose to move the arm to hotend 2, it works just fine, but if I try to move back to 1, it doesn't move. And now it is dead. So I got a servo from RC car fortunately, fixed the angle problem to changed the configuration.h, it works fine but opposite way. When I choose 1, it turned left. Is there configuration reverse code can change the servo direction?