First I homed(?) the X, Y, and Z so the nozzle was in the top right corner, but when pressing the home button it crashing into the bottom left corner.
what have I misconfigured?
top of page
To see this working, head to your live site.
While homing printhead crashing in bottom left corner
While homing printhead crashing in bottom left corner
2 answers0 replies
Like
2 Comments
bottom of page
Oke, after some trial and error, the platform has some difficulty moving when on the edges, so I attached a spacer to the bolt coming down from the platform; this way it hits the endstop earlier and doesn't have the problem of not being able to move the platform.
I got my first print, now onto the tweaking.
Oké, I‘ve found a temporary solution...
I had the TMC2208 upgrade installed on two axis, the X and Y, and when giving the command to move 10 mm, the printhead moved 20 mm on X and Y axis... (2x movement)
So I swapped the TMC2208 drivers for the standard drivers, changed the firmware to the A4988 Driver and tried again; this time the printhead does indeed move 10 mm when given this command.
but now when homing, it goes in the wrong x axis direction and hits the endstop; so it’s in the top right position and wants to home to the right...
setting it manually also makes it go to the right, which setting have I missed?