felix
Sep 21

its not realy round

1 comment

i did finally make my printer work, but the print which should be round are more oval. Does anyone know why?

Makertech
Sep 24

Check that your support beams are correctly aligned and the frame is square/perpendicular with the base.

0
New Posts
  • Antony Rose
    5 days ago

    First print (part two)

    Left the z calibration for another day and thought I'd try a benchy. I think I might have to check the temperature settings that I had on my proforge mk 1 as I think the ones for the mk2 might be too low for my filament. Lots of layer separation.
  • Antony Rose
    6 days ago

    Work in progress

    After taking an age to build it (health issues) I finally started printing tonight. Amazingly something appeared on the plate. Looks like I have some z calibration issues to sort out for the 2nd extruder, but all seems ok otherwise. Happy days.
  • flyboy.banderob
    Aug 22

    Print stopping mid-way

    Hey guys, just got my proforge 2d with DSE and have been having some printing issues. The calibration prints did their jobs, but are less than ideal, stopping at the 60% mark. I decided to switch to skirt for build plate adhesion type and it seemed to solve some issues with getting the benchy test model started And a clean first layer, Now however my print is freezing a few layers from the start and getting stuck into the model, any idea on next steps to take to try and get through an entire print? I am running off a freshly formatted SD card. Thanks in advance for any information!