I did all stage (also DSE installed) and stage 11 step 7. I pressed confirm ( the file is xyz cube gcode. source : ) but doesn't work. settinghotend temp : 220bed temp : 90print speed : 100%nozzle : 0.4 mmlayer height : 0.2infill : 30%
Makertech 3DAug 10, 2019Double check that you have the correct firmware installed for your machine: Proforge 2S DualAlso make sure that the platform is positioned correctly for the DSE setup (3rd image):
oh and auto leveling press. axis X was over moved
Double check that you have the correct firmware installed for your machine: Proforge 2S Dual
Also make sure that the platform is positioned correctly for the DSE setup (3rd image):