Return to Forum
Return To Mainsite
  1. Makertech 3D Forum
  2. Proforge 2S
  3. Hardware Components
  4. Extrusion Motors won't extrude with touchscreen
Search
Ryan Andrews
Apr 27, 2019
  ·  Edited: Apr 29, 2019

Extrusion Motors won't extrude with touchscreen

My extrusion motors stopped rotating after I stopped a print mid-way. I am no longer able to make them spin using the touchscreen.

First thing I tried was re-uploading the firmware. Didn't fix it.

Next, I tried re-uploading the touchscreen firmware. Didn't fix it.

I also used Pronterface to manually heat and extrude. This did work! Why is Pronterface able to make my extrusion motors work, but the touchscreen can't anymore? I double checked all the wiring to make sure nothing came unplugged. My best guess is something is wrong my ribbon cable that is connecting the touchscreen to the main board as that is what sends the commands (and using pronterface uses the USB plug which connects to a different spot on the board)


EDIT: It has fixed itself somehow. Not sure if using the filament > load feature fixed it versus just using the Extrusion > In feature...

0 comments
0

Copyright © Makertech 3D Ltd. 2020 - All Rights Reserved. - U.K. Company No. 10715504 - U.K. VAT No. GB 273781181

Return to main site here.