Hey there!
This morning I started tuning my profile in Cura. As base I used a normal Ender 3 profile.
After that, I made temp- and retract-towers.
I used PLA from Sunlu. As you can see, about 180°C is the sweet spot, which relatively surely tells, that the thermistor isn´t tuned correctly, but thats not the point in this post :D
In terms of retract, I made many tests. I tested the distance, the speed and so on and so forth.
The sweet spot (at 180°C) is:
Feel free to add your settings to the list!
Cheers & Happy printing
-Freddy
Sounds quite okay tbh! you should raise your Extruder current. this is set to 340 by default which is way to low. You can do this with Gcode (example is with 600mA which works fine):
M906 T0 E600
save to eeprom with M500
check value with M503
cheers mate and have fun with your printer! Would love to see a spreadsheet with the correct thermistor values and resistance, if you ever plan to create something :D