I don't have the printer yet (it is stuck in customs) but compiling a default version of marlin for a printer isn't too hard to do. It is just time consuming. But to speed it up you can just grab a config from a similar printer like for example the Two Trees Sapphire Plus and modify it a little bit so it fits with this printer....
For those who are interested:
Or:
Just enable the "SWITCHING_NOZZLE" option before compiling if you have the DSH. Grab their temp table from makertech's github:
My brother is currently working on one. Links are at general proforge 3 discussion on this forum. You’re more than welcome to help him with Marlin or me with Klipper :)
Thank you for the heads up! I would've never known.
So what's the ETA on a usable firmware? It doesn't have to be perfect.
If you release the source code that you have so far you'll get lots of assistance in improving it.
I don't have the printer yet (it is stuck in customs) but compiling a default version of marlin for a printer isn't too hard to do. It is just time consuming. But to speed it up you can just grab a config from a similar printer like for example the Two Trees Sapphire Plus and modify it a little bit so it fits with this printer....
For those who are interested:
Or:
Just enable the "SWITCHING_NOZZLE" option before compiling if you have the DSH. Grab their temp table from makertech's github:
So I don't get why it is taking so long.
Some more useful links for people:
My brother is currently working on one. Links are at general proforge 3 discussion on this forum. You’re more than welcome to help him with Marlin or me with Klipper :)
I'll do so once I have my printer