top of page
Forum Posts
Quodesh
Aug 25, 2020
In AXIS 3D Printer
Is anyone else having issues with the Pi Cam? I installed it and checked the ribbon cable is connected the correct direction a dozen times, but I still can't get any images from Octo print. I thought it was a power issue as I was getting that low power warning so I got an external power source for the Pi and still seeing the same issue. Am I missing something or did I get a faulty camera?
0
1
31
Quodesh
Aug 25, 2020
In 3D Printing
I finally got my octoprint working with an external power supply. I've been having issues with the first couple layers in certain spots of my bed so I installed and ran the bed visualizer and this is what I got. No wonder I was having issues. I've read someplace that the bed autolevel really only works for +/- 1mm. Seeing this kind of issue, are my only options a hammer to physically get it flatter or are there better bed levelers options out there?
0
3
59
Quodesh
Aug 03, 2020
In General Discussion
The 'Luke hot end fix' seems likes like simple way of ensuring the boden tube goes all the way down everytime. Does anybody recommend it or know of any issues with it?
0
2
89
Quodesh
Aug 02, 2020
In Assembly
After heating the hot end to 200 degrees, a small amount of filament leaked out before I hit the extrude button. But when I hit the extrude button, it clumped up and fell off. Since then it won't extrude anything. Does this mean the hot end is clogged? If so how do I fix it and how do I make sure it doesn't happen again as I have no idea what I did wrong.
0
7
115
Quodesh
Aug 02, 2020
In Assembly
As soon as I attempt to turn on the heater to 200 C I immediately get the following error. ============ [Setting hotend temperature to 200.000000 degrees Celsius. Error:MINTEMP triggered, system stopped! Heater_ID: 0 [ERROR] Error:MINTEMP triggered, system stopped! Heater_ID: 0 Error:Printer halted. kill() called! [ERROR] Error:Printer halted. kill() called! =========== Any ideas what could be causing this error?
0
5
231
Quodesh
More actions
bottom of page