Please release these instructions makertech, we really need you to prioritize pushing out all instructions and firmware so that we can assemble and use the printer.

Good to hear that you can power Pi off the mainboard. Which Raspberry Pi are you using?

I printed your feet anchors and tried them out. They are absolutely perfect! I also like how you can control their tightness by measuring the leftover thread and therefore make sure that all feet are getting the same squeeze.

@Josh Heiner excellent idea! Thanks for sharing!

Thank you for the heads up! I would've never known.

Really.... I didn't realize that. So the printer doesn't have the firmware to go on the main board for either the single or DSH?

I tried that but couldn’t hold the nut tightly enough with pliers. It kept slipping. I guess the force must be strong with you 😉

I got mine yesterday. Slowing working through it's assembly.

Solution = force a thin walled socket around the M4 nyloc nut (it'll distort the rubber around it and sort-of fit) then drive the M4 bolt in there with a power driver. Anyways... looking forward to the rest of the assembly but can't help to laugh at makertech's expense on this one.