You took the words out of my mouth. This printer sucks. My first one too. It almost had me to forget about the hole 3d printing hobby. It was only good for one thing... now I know what to look for when buying another printer. This was a waste of time and money.

I think you will need this one... its adjustable from 1-10 mm https://www.amazon.com/dp/B0746FYF5S The probe that came with the printer is 6-36 volts 4mm distance.

Printing with PETG. All my prints were warping. I took the sticker of the metal plate. I use an adhesive spray and got rid of the original powersupply. It was only 4A. At 80 celsius the printer shuts down after about half an hour. Put a 8.5A powersupply on the heated bed. Now I am printing at 90 celsius on the bed. And so far so good.

@Michael G Same problem here.

Had the same idea... ordered the mgn12h. Got it yesterday but no time yet to mount it. Nice to see it works and to bad for your new problem.

I had the same idea. Ordered the mgn12h. Got it yesterday but haven't had the time to mount it. Nice to see it works! Too bad for what went wrong with your printer.

@Gareth Owen I mounted an E3D v6 hotend. That makes a lot of diffence. Had same problems.

Agreed... I think I will order a good frame kit.

Does anyone have an opinion on the maximum speeds of the axis printer?

So far I am under 30mm Z with printing. When I am getting to the same problems... I also will give up on this mother.. Already thinking of building a solid frame and use the electronics of this thing.

Haha yes you are absolutely right

I have spend about 300 euros now on this thing. If I had known that then I had bought another printer last year.

So the new hotend makes the difference... it prints good quality now

Hi guys, I have calmed down and will give this machine 1 more try. My latest problem was the hotend. The tube was not hitting the end and the thermistor mounting was not good enough. When I tried to fix that I broke the wire. To get rid of both the problems I decided to order a complete new hotend. It would be nice if I finally can get a good print out of this thing. I ordered the E3D v6 hotend complete with cables and mounting. If all goes well it should arrive tomorrow.

Out the window with this piece of crap

Hi guys, I agree... this printer is a pain in the ... Its my first one but I think with a lot of upgrades it can be a nice printer. I am printing all the upgrade parts you guys put here. Because its my first printer I was first struggeling with temp and speeds. The prints are getting better. I wont"t give up yet