Finally getting round to building more then the base. Life got in the way this year so the upgrade came along at the right time. As did the pi4 availability.

I did struggle to grip the nut tight enough but am glad that the feet are actually attached to the body for the V3. I also have the V2 and the feet always fall off when moving it.

I had -15 today when re-flashing my marlin. After a lot of faffing around I realised that the bed sensor socket seems to be quite wide and I'd missed the pins when plugging it back in.

Are you looking here? https://www.makertech3d.com/pages/downloads That's where I got mine from.

I changed the temperature setting for the hotend and had success. It does depend on the make of filament as to the correct temperature. When I find out what works I write it on the spool so I don't forget.

Hi, that is definitely not right. When it is turned on, from the touchscreen "move" menu do the X, Y and Z buttons move the head in the right direction?

Hi Daryl, that sounds a strange action for the printer. Just to clarify, when you try the home command does the head go towards the x and y stops or the other direction? If so, does the x and y motors travel in the correct direction when using pronterface? (Just trying one thing at a time because from your initial comment it sounds like x and y are travelling the wrong way)

Frustrating. Doh. Fat fingers...

I just want to check a couple of things on mine but it's early into a 24 hour print at the moment and due to daddytaxi I won't get chance until Saturday afternoon. Sorry but I appreciate that it's rustrating!

Further to the Facebook post have you run a home command in pronterface to see what error comes up?

I've just sawn up a paint roller and used the end caps. It seems to have solved the problem for about £2