Hi, as im a bit of a noob on this and having Makertech Cura and Ultimaker Cura 4.6 (used for dual extrusion cause Makertechoe oozes and plobs alot) conflicts them and resets some of the settings i was looking a way to get Axis printer profile to ultimaker cura. I tried to download the files from github and ading them to Ultimaker cura folder but is just got erros so maybe i did something wrong.
Hoping someone will show me how to do it or what im doing wrong:S'
Also is there anyway to download full folder at once from github? Cause at Quality folder there are so many subfolders any of them containing so many .cfg-s
thanks in advance
Thanks @Johannes L got it working :)
Here is how I would do it:
Go to https://github.com/Makertech3D/Makertech-3D-Cura-Resources
There is a green button on the left to click and then select "download ZIP":
After downloading, extract the ZIP and copy all folder and contents to C:\Program Files\Ultimaker Cura 4.6\Resources or where your Cura resources are located. You don't need .gitattributes, LICENSE or README.md.
If you use both versions in parallel, there might be a conflict because of the profiles being the same. You might try to rename one of profiles if that's the case. For Cura 4.7.x you will need to update the variants files as mentioned in my other comment.