Marlin 2 has lots of new fields in those two files, I just opened them in an editor beside each other and updated the new config. that way. I have to do something with that drip tray as I blew anther solinoid recently. Currently run it with one extruder only. There’s an IDEX on kickstarter and anothEr one in a week or so. More $.
Meant to post this a long time ago but life happens. I couldn't do crap with the teflon tape method so I made a slot in a piece of acrylic and applied wax to it then filled it with silicone then pushed the parking tab into it and let it dry (actually made two of these molds and did both at the same time). Afterwards I removed it from the acrylic mold and now I have silicone pads (that were originally promised) bonded to the tabs and it works great to prevent leaking and lets me actually use the second head to do multi-material printing.
Thanks for the youtube link déro. I'm upgrading to a MKS SGEN L v1.0 with Marlin 2.0 and TMC2208s since one of my TMC2100 drivers went bad. Did you have to copy over all the .cpp & .h files from Marlin 1 (excluding the config.h and config.adv.h) before building Marlin 2 or did you get it running with just the minimum that comes with marlin?
Same, put in 2x what’s its worth and original parts still fail. Hot end fan died mid 10hr print. Wires to fan are too small and broke inside bundle, large mess. Just never ends.
It's a shame... I've modded so much on my printer to make it print nice (linear rails, SKR 1.4 Turbo board, silent stepper drivers, motor decouplers,...) I could have bought a much better printing machine for that money! Lesson learned, but it is really sad!
Went through a few servos. i Only run one hot end at a time because I couldn’t stop the dripping of the second HE. The tape also comes off and ruins prints.
I have the printer/processes setup for T0 0.4 nozzle, PETg. T1 0.3 PLA. I only use one or other for printed object.
I have to say that I watched the video about the servo just before posting... it seems the second servo died so it's clear that switching doesn't work... :(
Marlin 2 has lots of new fields in those two files, I just opened them in an editor beside each other and updated the new config. that way. I have to do something with that drip tray as I blew anther solinoid recently. Currently run it with one extruder only. There’s an IDEX on kickstarter and anothEr one in a week or so. More $.
Meant to post this a long time ago but life happens. I couldn't do crap with the teflon tape method so I made a slot in a piece of acrylic and applied wax to it then filled it with silicone then pushed the parking tab into it and let it dry (actually made two of these molds and did both at the same time). Afterwards I removed it from the acrylic mold and now I have silicone pads (that were originally promised) bonded to the tabs and it works great to prevent leaking and lets me actually use the second head to do multi-material printing.
Thanks for the youtube link déro. I'm upgrading to a MKS SGEN L v1.0 with Marlin 2.0 and TMC2208s since one of my TMC2100 drivers went bad. Did you have to copy over all the .cpp & .h files from Marlin 1 (excluding the config.h and config.adv.h) before building Marlin 2 or did you get it running with just the minimum that comes with marlin?
Same, put in 2x what’s its worth and original parts still fail. Hot end fan died mid 10hr print. Wires to fan are too small and broke inside bundle, large mess. Just never ends.
It's a shame... I've modded so much on my printer to make it print nice (linear rails, SKR 1.4 Turbo board, silent stepper drivers, motor decouplers,...) I could have bought a much better printing machine for that money! Lesson learned, but it is really sad!
Went through a few servos. i Only run one hot end at a time because I couldn’t stop the dripping of the second HE. The tape also comes off and ruins prints. I have the printer/processes setup for T0 0.4 nozzle, PETg. T1 0.3 PLA. I only use one or other for printed object.
Thank you déro!
I have to say that I watched the video about the servo just before posting... it seems the second servo died so it's clear that switching doesn't work... :(
All working.
search Edward Braiman on YouTube, he has lots of setup info.
Hi! Did you get the servo running with Marlin 2.0 and the SKR 1.4? It isn't working, I can't switch the nozzle (DSE)...
Swapped in a SKR V1.4 with Marlin 2.0 bug fix. Not fully configured but she prints.