Hello, I use a Proforge P3 with DSH. By default, Extrude prints 0. Now I want to print via extruder 1. I also created the corresponding print file with CURA. If I select extrude 1 under "Custom", the printer still switches to extruder 0 when printing. Filament is loaded in E1. What do I have to do to print from E1? Thank you for your help.

Does anyone have a recommendation on how to get spare parts for the Proforge 3? The on/off switch is defective. I have requested a replacement delivery by email or asked for a delivery note. There is no answer or delivery.

Home for the Z axis does not work. Can anyone help me how exactly the Home-Z is set. So far I'm doing this: - Stepper disable - Flexplate manual until red light on the sensor - Minimum down, turn off the light - Stepper back on - Press the Z-Home button on the touch screen Unfortunately, this approach doesn't work. When I press the home button, the flexplate rises too far and presses hard on the nozzle. I then switched off immediately. Do I have to or can I reset the setting somewhere? I have the feeling that totally wrong coordinates are approached. Is there a way to reset all values ​​to factory settings? Thanks for the help Hermann

My Orbiter extruder stalls very often during a print. What can you do about it and how is it cleaned? Thanks for help. Hermann